CLOSE
Search for “” keywords, total search results
MBI1838 is an instant On/Off LED driver for LED backlight applications and exploits PrecisionDrive™ technology to enhance its output characteristics. At MBI1838 output stage, 8 regulated current ports are designed to provide uniform and constant current sinks for driving LEDs within a large range of VF variations, and in order to eliminate the heat generated by VF variations, a feedback function is integrated in MBI1838 to control the LED power source.
MBI1838 provides 8-channel constant current ports to match LEDs with equal current. Users may adjust the output current from 15mA to 80mA through an external resistor, Rext, which gives users flexibility in controlling the light intensity of LEDs. In addition, users can precisely adjust LED brightness from 0% to 100% via output enable pin (OE) with pulse width modulation signal.
MBI1838 can detect the error status of LED open-circuit, short-circuit, and the over temperature during the operation, and the pins, /ERR and /TH report these fault conditions. When LED open-circuit or short-circuit faults happen, only the faulted channel will be shut down to avoid affecting other normal channels. MBI1838 will disable all the output channels until the junction temperature is lower than the hysteresis, if the over temperature status occurs.
Additionally, to ensure the system reliability, MBI1838 is built with thermal pad which enhances the heat dissipation.
MBI1838 产品规格
-
ItemsSpec.Content
-
01输出通道数8
-
02拓扑结构线性
-
03每通道输出电流值80mA
-
04输出管脚耐压70V
-
05输出电流精确度-通道间1% (一般值)
-
06输出电流精确度-IC间6% (最大值)
-
07电源电压8-40V
-
08调光方式数字
-
09保护功能-LED开路/短路
-
10保护功能-过热
-
11保护功能-过热错误旗帜
-
12RoHS环保封装TSSOP24
-
13主要应用LED照明、车用照明
